Construction of the LFA loop for a 6m 3elem. antenna

Creating a single tube LFA loop for the 6m band .
Sizes according the information of Justin, G0KSC, A great designer of new antenna types.

You need to work concentrated and can't afford a mistake.
Corners have to be 90 degrees and all sizes must be accurate.
Besides the completed loop must have a flat surface shape.

Fortunetaly I still had a 6 meter long 10mm tube. 5.90 m was used for this loop.

Because it's only should be a test, I used old channel 2 Messa TV reflector and director,
extended by several centimeters to get the right sizes.

Well, put on the roof the first hour I already could hear the beacon LX0SIX.
This was long ago.  Still I heard noise of about S3-4, but this is considerabely less then
on a dipole where it is S6-7.

The antenna is 10 meters above ground and that's also the h.a.a.t.

Eerste SWR test in de tuin.

Bevestigingsblokje van 20mm dikke snijplank

Messa bevestiging, makkelijk te bevestigen en mooi haaks.